Every part, checked against
the spec.
Set up receiving, in-process, and final inspections with the checks and measurements that matter, run them on the floor from a tablet, and record pass/fail against your specs. Anything out of tolerance flows straight into nonconformance — so a bad part is caught, not shipped. And because TLM is two apps on one system, inspectors work in a browser while your quality team owns the plans.
Receiving · in-process · final · measurements vs spec · fails → nonconformance
The right check, at the right point — every time.
Inspection plans that fit the part
Define exactly what to check and measure — per part, per operation, per stage — instead of a one-size-fits-all form.
Measurements against spec
Capture readings with tolerances; TLM flags anything out of spec automatically, so a marginal part can’t slip by.
Sampling that makes sense
AQL and sampling plans so you inspect the right quantity — not everything, and not too little.
Run it on the floor
Inspectors work from a tablet at the point of inspection — no clipboards, no re-keying, no lag.
Fails become nonconformances
A failed inspection opens an NCR automatically, with the measurements and photos already attached.
The inspection record
Results, readings, who and when — captured against the part and lot, traceable and audit-ready.
One system. Two apps. The right tool for every person.
TLM runs as a deep desktop/network Main App and a modern browser Web App on one shared database. Your quality team owns the inspection plans; inspectors just run them.
- Build inspection plans, characteristics, and tolerances
- Configure sampling (AQL) and inspection points
- Assign inspections to receiving, in-process, and final
- Link results to the part, lot, and supplier
- SPC and measurement reporting · the complete record
- Configure permissions and pass/fail rules
- Run inspections from a tablet at the point of inspection
- Enter measurements and pass/fail; out-of-spec auto-flags
- Attach photos and notes right where the part is
- Live dashboards: due, in progress, failed
- Modern web reports — schedule email alerts, and new ones your account rep can spin up fast
Same data, same system — pick the front door that fits the person.
Find the characteristic that keeps failing.
Ask Claude which parts or dimensions fail inspection most, in plain English, and let Claude Reporting build the first-pass-yield trend from live data — so you fix the process behind the reject, not just the reject.
An inspection result is never a dead end.
A failed inspection opens a nonconformance, ties back to the supplier for receiving rejects, feeds your SPC, first-pass yield, and cost-of-quality metrics, and rolls into Management Review — so every measurement earns its keep.
Bring us a part and its print.
We’ll build the inspection plan, run a check on a tablet, flag an out-of-spec reading, and watch it open a nonconformance — in a 20-minute demo.
Request a Demo →One of our friendly account reps will be assigned to your account and can walk you through it · No credit card